Snmp - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

SNMP

On the Advanced / SNMP page, you can enable and configure the SNMP agent of the router.
The SNMP agent is a service which sends data on the state and settings of the device where is it
enabled to the SNMP manager (the network management system of your ISP or system
administrator).
In order to enable the SNMP agent, move the SNMP service status switch to the right. Then
specify the needed parameters.
Parameter
Remote subnet
Hostname
The contact information
for the administrator
System location
After specifying the needed parameters, click the APPLY button.
Figure 110. The Advanced / SNMP page.
Configuration
The IP address of the remote subnet where the SNMP manager is
located.
A name of the router for identification in the SNMP manager.
Additional information used to contact the administrator of the
router.
Additional information used to locate the router.
Page 130 of 191
Configuring via Web-based Interface
Description