The following table describes the parameters of this page:
Field
Current Settings
Factory Default
Settings
3.7.5 Diagnostics
Choose Maintenance > Diagnositics, the page shown in the following figure
appears. The page shows the test results for the connectivity of the physical layer
and protocol layer for both LAN and WAN sides.
The following table describes the parameters of this page:
Field
Virtual Circuit
Save the current settings and then reboot the router.
Reset to the factory default settings and then reboot
the router.
Choose a PVC from the drop down list to test.
53
GO-DSL-N150
Description
Description
User Manual