D-Link GO-DSL-N150 User Manual page 62

User Manual
GO-DSL-N150
Wi-Fi Protected Access, pre-shared key. Encrypts data frames before
transmitting over the wireless network.
Pre-shared Key: The Pre-shared Key are used to encrypt data. Both the ADSL
Router and the wireless clients must use the same WPA-PSK key for data
transmission.
Wireless LAN :: Advanced setting
Beacon Interval: The Beacon Interval value indicates the frequency interval of
the beacon. Enter a value between 20 and 1000. A beacon is a packet broadcast
by the Router to synchronize the wireless network.
RTS Threshold: The RTS (Request To Send) threshold (number of bytes) for
enabling RTS/CTS handshake. Data with its frame size larger than this value will
perform the RTS/CTS handshake. Setting this attribute to be larger than the
maximum MSDU (MAC service data unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
Fragment Threshold: The threshold (number of bytes) for the fragmentation
boundary for directed messages. It is the maximum data fragment size that can
be sent. Enter a value between 256 and 2432.
DTIM: This value, between 1 and 255, indicates the interval of the Delivery Traffic
Indication Message (DTIM).
802.11b/g
Wireless LAN :: MAC Filter
You can allow or deny a list of MAC addresses associated with the wireless
stations access to the ADSL Router.
Status: Use the drop down list box to enable or disable MAC address filtering.
Action: Select Deny Association to block access to the router, MAC addresses
not listed will be allowed to access the router. Select Allow Association to
permit access to the router, MAC addresses not listed will be denied access to
the router.
59