D-Link GO-DSL-N150 User Manual page 60

Hide thumbs Also See for GO-DSL-N150:
Table of Contents

Advertisement

User Manual
GO-DSL-N150
Internet :: MAC Spoofing
MAC Spoofing (Internet MAC Spoofing) is XXXX.
LAN settings
These are the IP settings of the LAN interface for the device. These settings may
be referred to as Private settings. You may change the LAN IP address if needed.
The LAN IP address is private to your internal network and cannot be seen on the
Internet.
LAN :: Dynamic Route
Please refer to Internet::Dynamic Route. The only difference is the interface.
LAN :: Multicast
Please refer to Internet::Multicast. The only difference is the interface.
LAN :: DHCP Server
DHCP stands for Dynamic Host Control Protocol. The DHCP Server gives out IP
addresses when a device is booting up and request an IP address to be logged
on to the network. That device must be set as a DHCP client to obtain the IP
address automatically. By default, the DHCP Server is enabled. The DHCP
address pool contains the range of the IP address that will automatically be
assigned to the clients on the network.
Starting IP Address: The starting IP address for the DHCP server's IP
assignment.
IP Pool Count: The max user pool size.
Lease Time: The length of time for the IP lease.
LAN :: DHCP Relay
A DHCP relay is a computer that forwards DHCP data between computers that
request IP addresses and the DHCP server that assigns the addresses. Each of
the device's interfaces can be configured as a DHCP relay. If it is enable, the
DHCP requests from local PCs will forward to the DHCP server runs on WAN
side. To have this function working properly, please run on router mode only,
disable the DHCP server on the LAN port, and make sure the routing table has
the correct routing entry.
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents