Maintenance - D-Link GO-DSL-N150 User Manual

User Manual
GO-DSL-N150
IP Filter
Select Telnet, FTP, TFTP, Web, SNMP, Ping to block incoming WAN requests for
the corresponding service(s).
SNMP
Simple Network Management Protocol is used for exchanging information
between network devices.
Get Community: Select to set the password for the incoming Get requests from
the management station.
Set Community: Select to set the password for incoming Set requests from the
management station.
UPnP
UPnP (Universal Plug and Play) is a distributed, open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between devices. A
UPnP device can dynamically join a network, obtain an IP address, convey its
capabilities and learn about other devices on the network. In turn, a device can
leave a network smoothly and automatically when it is no longer in use. UPnP
broadcasts are only allowed on the LAN.
Auto-Configure: UPnP network devices can automatically configure network
addressing, announce their presence in the network to other UPnP devices and
enable exchange of simple product and service descriptions.
DDNS
The Dynamic Domain Name System lets you use a static host name with a
dynamic IP address. User should type the host name, user name and password
assigned to your ADSL Router by your Dynamic DNS provider. User also can
decide to turn on DYNDNS Wildcard or not.
3.8.5

Maintenance

Choose Help > Maintenance, the page shown in the following figure appears.
This page that is displayed contains Administration, Time Zone, Firmware,
SysRestart and Diagnostics.
65