D-Link GO-DSL-N150 User Manual page 21

If your ISP provides you an IP address automatically, you may select Dynamic IP
in the ISP encapsulation. Dynamic IP is typically used for Cable services. Please
enter the Dynamic IP information accordingly.
The following table describes the parameters of this page:
Field
Encapsulation
Bridge Interface
NAT
You can choose 1483 Bridged IP LLC, 1483
Bridged IP VC-Mux, 1483 Routed IP LLC
(IPoA) or 1483 Routed IP VC-Mux.
You can choose Activated or Deactivated.
Select it to enable Network Address Translation
(NAT) function. If you do not select it but want to
access the Internet normally, you must add a
route on the uplink equipment. Otherwise, the
18
GO-DSL-N150
Description
User Manual