Status - D-Link GO-DSL-N150 User Manual

User Manual
GO-DSL-N150
Administration
There is only one account that can access Web-Management interface. It is
admin. Admin has read/write access privilege. In this web page, you can set new
password for admin.
Time Zone
The system time is the time used by the device for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If a
NTP server is set, you will only need to set the time zone. If you manually set the
time, you may also set Daylight Saving dates and the system time will
automatically adjust on those dates.
Firmware
You can upgrade the firmware of the Router in this page. Make sure the firmware
you want to use is on the local hard drive of the computer. Click on Browse to
browse the local hard drive and locate the firmware to be used for upgrade.
SysRestart
User can restart the device with current settings or factory default settings.
Diagnostics
The Diagnostic Test page shows the test results for the connectivity of the
physical layer and protocol layer for both LAN and WAN sides.
3.8.6

Status

Choose Help > Status, the page shown in the following figure appears. This
page that is displayed contains Device Info, System Log and Statistics.
Device Info
This page displays the current information for the ADSL Router. It will display the
Firmware version, LAN, WAN and MAC address information.
66