D-Link GO-DSL-N150 User Manual page 38

The following table describes the parameters of this page:
Field
Rule Index
Rule Type
Local Start/ End IP
Public Start/ End IP
The Virtual server rule index for this VC. You can
specify 10 rules in maximum. All the VCs with single IP
will use the same Virtual Server rules.
There are four types of One-to-One, Many-to-One,
Many-to-Many Overload and Many-to-Many
No-overload.
Enter the local IP Address you plan to mapped to. Local
Start IP is the starting local IP address and Local End
IP is the ending local IP address. If the rule is for all
local IPs, then the Start IP is 0.0.0.0 and the End IP is
255.255.255.255.
Enter the public IP Address you want to do NAT. Public
Start IP is the starting public IP address and Public End
IP is the ending public IP address. If you have a
dynamic IP, enter 0.0.0.0 as the Public Start IP.
35
GO-DSL-N150
Description
User Manual