D-Link GO-DSL-N150 User Manual page 24

Field
Gateway
NAT
Dynamic Route
Direction
Multicast
Select PPPoA/PPPoE in the ISP encapsulation if your ISP requires you to use a
PPPoE connection. This option is typically used for DSL services. Select
Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Select Static PPPoE to use a static IP address for your PPPoE
connection. Please enter the information accordingly.
Description
which is provided by your ISP.
You can enter the gate way ip for dial-up,
which is provided by your ISP.
Select it to
Translation (NAT) function. If you do not
select it but want to access the Internet
normally, you must add a route on the uplink
equipment. Otherwise, the access to the
Internet fails. Normally, it is enabled.
You can select RIP1, RIP2-B or RIP2-M.
You can select None, Both, IN Only or OUT
Only.
You can choose Disabled, IGMP v1 or IGMP
v2.
21
GO-DSL-N150
enable Network
User Manual
Address