Interpreting Leds; The Maintenance Menus; The Diagnostics Menu; Table 5. Maintenance Menus - Item Name And Description - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

Interpreting LEDs

LEDs provide a visual indication of the status of certain library components. LEDs can sometimes
communicate that a problem exists when the RAS ticket cannot. For example, a LED can indicate a
firmware problem that prohibits the library from generating RAS tickets.
The following components of the library have LEDs:
Front Panel
Ethernet Connector

The Maintenance Menus

Table 5. Maintenance Menus - Item Name and Description

Item name
Library FW upgrade
Prepare to Ship
Reboot
Restore default
Clear WEB password

The Diagnostics Menu

Table 6. Diagnostics Menu - Item Name and Description

Item name
Event log
System test
Cycle test
StorageLibrary T40+ Series Installation and User Guide
Description
Upgrades the library FW through RMI
When selected, the robotics is positioned for installing the transport locking
screws.
The magazines are ejected to facilitate the installation.
The library cannot be safely shipped with cartridges in the magazines.
The Prepare to ship command must be run before the library is transported,
in order to re-install the transport locking screws and to remove all cartridges
in the library. The Prepare to ship command is available at the Front Panel
Interface (FPI).
Performs a hard reset of the library.
Sets the library settings to their factory default values.
Clears the WEB password (from FPI only)
Description
Displays a log that contains information about library and drive configuration,
event log and error log. This log can be saved to a file or sent via e-mail to
technical support.
Runs a test of the library hardware.
Starts a test where cartridges are moved randomly between magazine slots
and between the drive and the magazines.
93