Hardware Installation; Figure 3. Two T40+ Units Mounted In A Rack - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

This chapter provides the following information:
Preparing for Installation
Installing one or more StorageLibrary Product(s) in a Rack
Removing the Transport Locking Screws
Mounting the Rack Mount Ears
Installing the Library Cables
Labeling Cartridges for the Barcode Reader
You must remove the transport locking screws when powering up the unit
Caution
for the first time, or it will not operate.
The StorageLibrary T40+ has blanking plates on the top and bottom cover. Do NOT
Caution
remove any blanking plates before instructed to do so. Some of the blanking plates
are removed if two or more units are used in a Pass-Thru system.

Figure 3. Two T40+ units mounted in a rack

StorageLibrary T40+ Series Installation and User Guide
4

Hardware Installation

4
21