Adding, Removing And Replacing; Power Supply Unit; Figure 37. The Back Of The Library - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

9
9

Adding, Removing and Replacing

This chapter describes how to add, remove, and replace hardware within your library. Adding,
removing, or replacing library components requires you to power off the entire library if you do not
have a redundant power supply system.

Power Supply Unit

These instructions explain how to remove and replace a power supply, how to add a second power
supply to achieve a fully redundant power supply solution.

Figure 37. The Back of the Library

StorageLibrary T40+ Series Installation and User Guide 75