Remove The Transport Locking Screws; Figure 20. The Complete System; Figure 21. Transport Locking Screws Marked With Red Plastic Tabs - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

Figure 20. The Complete System

Remove the Transport Locking Screws

To protect the library during transport, four transport locking screws hold the robotics in a locked
position. The screws are marked with red plastic tabs protruding between the magazines and the front
panel.
The transport locking screws must be removed before the StorageLibrary
Caution
can operate normally. Be careful not to drop any of the transport locking
screws inside the unit.

Figure 21. Transport Locking Screws Marked with Red Plastic Tabs

StorageLibrary T40+ Series Installation and User Guide
Two StorageLibrary T40+
units in a Pass-Thru Mode.
33