Figure 2. Rear Panel Of The Storagelibrary With 1 Full-Height Scsi Drive Installed - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

A shielded male HD68 SCSI terminator
SAS port cable
FC port cable
Ethernet Port
This port is for networking in support of the Web Client. It is also used to communicate between units
that share cartridges in a Pass-Thru system. It allows you to connect the StorageLibrary to a 10
BaseT compatible Ethernet network.
Battery Holder
The battery for the Real Time Clock (RTC) is located behind a plate at the back of the library. See
Figure 2. A drive power extension cable can be found in the same location.
Back Panel Cover plate
If a drive bay is empty, a cover plate covers the opening to prevent dust from entering the library.
Redundant Power Supply
A redundant power supply is installed in the power supply slot marked 2. See
Replacing for more information.

Figure 2. Rear Panel of the StorageLibrary with 1 full-height SCSI Drive Installed

Redundant Power
Supply in Slot 2.
Mains Power Switch,
Fuse and AC-inlet for
Power Supply in Slot 1
16
Power Supply with
Fans in Slot 1
Tape Drive
with Fan
Back Panel
Cover Plates
SCSI Real Time Clock-
Connectors
battery and drive
power extension
cable behind
cover
Adding, Removing and
Ethernet
Cooling
Port
Fans
Emergency
Release
Tool.
Product Overview