Labeling Cartridges For The Barcode Reader; Figure 26. Positioning Of Barcode Label For Lto Cartridges; Figure 27. Available Tandberg Data Cartridge Labels - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

Labeling Cartridges for the Barcode Reader

If you want to use the barcode reader functionality in the library, you must attach barcode labels to the
cartridges.
You need to use StorageLibrary specific bar code labels to ensure reliable
Note
functionality of the barcode reader.
Cartridge labels must be oriented on the cartridges as shown in the Figure 26.
Caution
Other orientations of the cartridge labels may interfere with the loaders
operation.
Cartridge labels must be positioned on the cartridges as shown in Figure 26.The locking mechanism
should be on the left. For more information, see the

Figure 26. Positioning of Barcode Label for LTO Cartridges

In this figure, the dotted rectangle show the correct placement for the cartridge labels.
If you need more cartridge labels, you can order more labels from your local Tandberg Data sales
representative. Two types of cartridge labels are available. See Figure 27 below for part numbers.

Figure 27. Available Tandberg Data Cartridge Labels.

Label for all LTO cartridges: Part No. 870222
Figure 27 show the two Tandberg Data specific cartridge labels available. It also show the
corresponding part numbers needed when ordering labels.
For the cleaning cartridges, use the labels starting with prefix CLN. In the right-most image, the
prefix of this type of label is CLNvnnLg, where v identifies a drive unique cleaning cartridge, nn is
used to track individual cleaning cartridge activity (for example usage and life), and g is the LTO
generation.
StorageLibrary T40+ Series Installation and User Guide
Working With Cartridges and Barcodes
Labels for LTO3-cartridges: Part No. 1015514
Labels for LTO4-cartridges: Part No. 1017351
chapter.
39