Table of Contents
Advertisement
Rea® Focus™
4.6.1 Flip-up armrests
A
Loosen the screw A.
1.
2.
Adjust the armrest height to the required position.
3.
Re-tighten the screw.
4.
Repeat the procedure on the opposite side.
5 mm allen key
4.6.2 Detachable armrests
Loosen the screw A.
1.
2.
Adjust the armrest height to the required position.
3.
Re-tighten the screw.
4.
Repeat the procedure on the opposite side.
5 mm allen key
4.6.3 Height adjustable armrests
Height adjustment:
1.
Loosen the screw or the handwheel B, depending on which type
of armrest you have chosen.
2.
Adjust the armrest height to the required position.
14
3.
4.
Depth adjustment:
1.
2.
3.
4.
4.7 Adjusting the seat depth
A
1.
2.
3.
4.
5.
4.8 Adjusting the seat width
Re-tighten the screw / handwheel.
Repeat the procedure on the opposite side.
5 mm allen key
Loosen the screw or the handwheel A, depending on which type
of armrest you have chosen.
Adjust the armrest height to the required position.
Re-tighten the screw / handwheel.
Repeat the procedure on the opposite side.
5 mm allen key
WARNING!
Risk of tipping
– When the seat depth is adjusted backwards, also adjust
the rear wheels backwards to decrease the risk of
tipping.
A
Remove the armrests.
Loosen the two screws A.
Adjust to the desired seat depth.
Re-tighten the screws.
Repeat the procedure on the opposite side.
5 mm allen key
The seat width can be increased by 25 mm.
A
1431580-B
Advertisement
Table of Contents
