Configuring The Pb50; Understanding The Display Modes; Understanding Ready Mode; Understanding Information Mode - Intermec PB50 User Manual

Portable label printer

Hide thumbs Also See for PB50:

Table of Contents

Chapter 2 — Configuring the PB50

Configuring the PB50

There are several different ways you can change the configuration

settings of the printer. You can change them directly from the

display, or remotely from the SmartSystems console.

For more information on the IPL menu system, see Appendix B,

"IPL and Fingerprint Setup Menus."

The PB50 has six display modes to help you effectively interact

with the printer: Ready, Information, Paused, Setup, Error, and

Test. Use the following sections to understand the different

printer modes

The printer is in Ready mode when the printer is on and ready to

print. The main screen displays the power status, the radio status,

and the printer language and version.

SETUP:

IPL 8.70

SER-COM

The PB50 in Ready Mode

When the printer is in Information mode, it displays a subset of

pertinent information about the printer. If the printer

experienced an error, the error message displays first followed by

the printer information. Each message displays on the screen for

five seconds. After five seconds on the last information screen, the

printer exits Information mode.

To enter Information mode

• Press the Information button on the control panel.

PB50 Portable Label Printer User's Guide

Table of Contents