Lifecycle 9500 / 9100 Series Recumbent Exercise Bikes
DIAGNOSTICS
WATT
P R O G R A M
ON
DIAGNOSTICS STATE 10 - WATTS PROGRAM ENABLE/DISABLE
Within this state, WATTS can be turned ON or OFF.
By default, the LifeCycle will have the WATTS PROGRAM ON.
The 'DOWN ARROW' will turn OFF the WATTS PROGRAM.
The 'UP ARROW' will turn ON the WATTS PROGRAM.
The ENTER key LED indicates when the value is at the default setting of WATTS PROGRAM ON.
The value is stored in EEROM and is kept when the bike is not in use.
Press the 'CLEAR/PAUSE' key to return to DIAGNOSTICS STATE 9.
Press the 'START/ENTER' key to advance to DIAGNOSTICS STATE 11.
16