Diagnostics State 5 - Loopback Test - Life Fitness Lifecycle 9500HR Series Service Manual

Lifecycle 9500 / 9100 Series Recumbent Exercise Bikes
DIAGNOSTICS

DIAGNOSTICS STATE 5 - LOOPBACK TEST

Within this state, the RS232 port is tested. A shorting jumper must be connected for the result of this test to be
correct.
If functioning correctly, "RS232 PASS" will be displayed.
If not-functioning correctly , "RS232 OFF" will be displayed.
Press the 'CLEAR/PAUSE' key to return to DIAGNOSTICS STATE 4.
Press the 'START/ENTER' key to advance to DIAGNOSTICS STATE 6.
10
OFF