Diagnostics State 3 - Version#: Rpm, Hr, And Load Tests - Life Fitness Lifecycle 9500HR Series Service Manual

Lifecycle 9500 / 9100 Series Recumbent Exercise Bikes
DIAGNOSTICS

DIAGNOSTICS STATE 3 - VERSION#: RPM, HR, and LOAD TESTS

The PROGRAM VERSION NUMBER (ex. P1.01) will be displayed in the ELAPSED TIME window.
The present RPM will be displayed in the RPM window.
The HEART RATE, if present, will be displayed in the LEVEL/HEART RATE window.
The present LOAD DUTY CYCLE applied to the alternator will be displayed in the CALORIES/HOUR window if the
LIFEPULSE GAIN display has not been selected. LOAD duty cycle ranges from 0-415 for 9V battery products, 0-
250 for all others in order of increasing load. This value can be adjusted using the UP/DOWN keys to decrement
and increment the LOAD duty cycle.
Pressing the DISPLAY LOCK key will disable the LOAD DUTY CYCLE display if enabled, turn off the
CALORIES/HR, and display the LIFEPULSE GAIN if HANDS ON LIFEPULSE sensors. Pressing the DISPLAY
LOCK key again will re-enable the LOAD DUTY CYCLE display.
Pressing the WATTS/METS key will toggle the display of the LIFEFITNESS PART # of the console software.
Press the 'CLEAR/PAUSE' key to return to DIAGNOSTICS STATE 2.
Press the 'START/ENTER' key to advance to DIAGNOSTICS STATE 4.
6
P1.31 P1.31 HR HR
P1.31 P1.31 HR HR
52 52 0 0
52 52 0 0