Battery Over-Heating; Exercise Bike Not Stable - Life Fitness Lifecycle 9500HR Series Service Manual

Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
TROUBLESHOOTING GUIDE
Malfunction

Battery over-heating.

Exercise bike not stable.

8
Probable Cause
Reverse polarity.
Battery cable insulation worn
and contacting frame.
Malfunctioning Display
Console.
Malfunctioning Alternator
Control Board.
Defective or damaged main
wire harness.
Stabilizer foot pads.
Floor surface not level.
Stabilizer bar not attached
firmly to frame.
Wheel(s) damaged.
Frame damaged.
Corrective Action
RED wire to positive (+) lead and BLACK wire
to negative (-) lead.
Inspect Wires and replace as necessary.
Test with known good Display Console.
Replace malfunctioning Display Console.
Test with known good Alternator Control
Board. Replace defective board.
Inspect Main wire harness, and replace if
necessary.
Adjust Foot Pads.
Position bike on level surface.
Tightened hardware.
Replace damaged wheel(s).
Contact Life Fitness Customer Support
Services.