Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
How To...REPLACE THE FREEWHEEL/PULLEY ASSEMBLY
Tools Required: Combination wrenches, pliers, screwdrivers, e-ring tool, center punch, and belt tensioning gage
1. See "How To...Replace Shrouds" in
this section.
2. Mark the position of the
ALTERNATOR TENSIONING BOLT
at the MOUNTING BRACKET, then
remove TENSIONING BOLT.
3. Loosen the ALTERNATOR PIVOT
BOLT and push the ALTERNATOR
forward to slacken the
ALTERNATOR BELT.
4. Mark the position of the IDLER
BRACKET, Remove and loosen
MOUNTING BOLTS as illustrated.
5. Loosen the TENSION BOLT and
move the IDLER BRACKET forward
to slacken the POWER GRIP BELT.
Tensioning Bolt
Torque 5-7 FT. LBS.
Mounting Bolt (Loosen)
Torque 27-33 IN. LBS.
Mounting Bolt (Remove)
Torque 27-33 IN. LBS.
Alternator
Mounting
Bracket
Alternator
Tensioning Bolt
Torque 18-20 FT. LBS.
Alternator Pivot Bolt
Torque 30-35 FT. LBS.
Idler Bracket
Alternator Belt
Power Grip Belt
5