Lifecycle 9500 / 9100 Series Recumbent Exercise Bikes
DIAGNOSTICS
DIAGNOSTICS STATE 17 EEPROM TEST (Integrated PCB Only)
Within this state, EEPROM can be tested.
This diagnostic state tests the Display Console EEPROM by reading, writing, and replacing all used locations in the
Display Console EEPROM. The EEPROM location being tested will appear in the display message center. Pressing
the DOWN ARROW will initiate the EEPROM test. If the test completes successfully, the message EEPROM
GOOD will appear. If the test fails, the message EEPROM BAD AT XX will display with the bad EEPROM location.
Press the 'CLEAR/PAUSE' key to return to DIAGNOSTICS STATE 16.
Press the 'START/ENTER' key to advance to DIAGNOSTICS STATE 18.
24