Table of Contents
Advertisement
Reviewing Video Clips
The ClipPlayer Screen displays the clip images.
144
Note
The display settings of your PC affect the image display.
If you are experiencing display problems, click the right mouse
button on the background screen and select
Properties
select Advanced
Acceleration to Full.
Ensure sure that DirectX version 9.0 or higher has been installed
if the display problem continues to occur. To check the version
of DirectX, click Start
The DirectX Diagnostic Tool dialog box displays.
Then move to the Display tab and ensure DirectDraw
Acceleration is set to Enabled. Test the DirectDraw by selecting
the DirectDraw Test button. Please check the driver version of
the video card and update it to the latest version available.
If you still have display problems after changing all display
settings as described above, try replacing the video card. Video
cards with an ATI chipset are recommended..
Option
ClipPlayer Function
Exit the Player program.
Go to the beginning of the video clip.
Play the video clip in fast reverse.
Go back one frame of the video clip.
Play the video clip.
Go forward one frame of the video clip.
Play the video clip in fast forward.
Go to the end of the video clip.
Show the previous camera group if there is recorded video in the
previous camera group in the current screen mode.
Cycle through the screen layouts: 2x2, 1+7, 3x3, and 4x4.
Show the next camera group if there is recorded video in the next
camera group in the current screen mode.
Settings then set the Color quality to 32 bit. Then
Troubleshoot and set Hardware
RUN and type dxdiag and press Enter.
Advertisement
Table of Contents
