Table of Contents
Advertisement
Operation
Naming a Video Clip File
The DVR automatically assigns a file name to the video clip. However, you can give the
video clip file a different name.
1.
2.
3.
4.
5.
6.
Using the DVR While Backing Up Video
You can use other functions on the DVR while video is being backed up.
Highlight Close and then press
to check the progress.
See
have copied. You do not need to install any special software on your personal computer
to review the video clips.
136
Highlight the field beside File Name and then press
appears.
Enter a file name for the video you are backing up and then select Close. The
DVR automatically adds the camera number (for example, 01) and .exe to the file
name.
Note
When naming a file, you cannot use the following characters:
\, /, :, *, ?, ", <, >, |.
Highlight Include Text-in Data and then press
When this feature is On, you can verify that the data is written on the DVD RW
properly.
Highlight Start and then press
The confirmation screen displaying data size appears. When the storage device
does not have enough space, the DVR asks if you want to copy as much of the
video clip as possible in the available space.
Highlight Continue and then press
After the clip copy starts, select Cancel to cancel it or Close to hide the screen.
When selecting Close, Clip Copy continues and a confirmation screen displays
when complete.
Note
Only 4.7 GB DVD media is available. To clip copy video
on the DVD media using remaining space, the size of
previously recorded data on the DVD media should be
less than 4 GB.
The file size for clip copy is limited to 2 GB.
Appendix C, Reviewing Video Clips
to toggle between On and Off.
after you have given the video clip a file name.
to continue clip copy.
. You can return to the Clip-Copy screen at any time
for instructions on how to review video clips you
. A virtual keyboard
Advertisement
Table of Contents
