Figure 3-53 Alarm-In Actions 1 Setup Screen - Honeywell HRSD8 User Manual

Configuration
Selecting a Camera for Recording
1.
2.
Setting Alarm-Out Actions
1.
2.
3.
4.
Document 800-03650 Rev D
02/09
Figure 3-53 Alarm-In Actions 1 Setup Screen
Highlight the desired field under the Record heading, and press
cameras appears.
Select the cameras that you want the DVR to record when an associated alarm
input is triggered.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Highlight the desired field under the Alarm-Out heading, and press
Alarm-In 1: Alarm-Out screen appears.
Select the Alarm Output connectors that you would like to activate whenever the
DVR detects an input on the associated alarm input.
Turn On or Off the internal buzzer of the DVR. When set to On, the internal buzzer
beeps when an event occurs.
Select OK and press
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
to load the Alarm-Out Actions settings.
. A list of
. The
81