Figure 3-28 Modem Setup Screen; Table 3-5 Modem Setup Screen Options - Honeywell HRSD8 User Manual

Configuration
3.
Setting Up the Modem
Highlight the Modem tab in the Network screen, and the Modem screen appears.
56
Highlight the field beside Password and press
you can enter the password for ADSL connection.
Note Entering the ID and Password and highlighting OK reads
the current IP address of the DVR configured by the
ADSL network.
If the DVR is configured for DHCP or an ADSL network,
the IP address of the DVR might change whenever the
unit is turned on.
Figure 3-28 Modem Setup Screen
Note If the RS232C port is in use for remote control, networking
cannot be configured for a modem.
Table 3-5 Modem Setup Screen Options
Option Action
Enable Highlight Enable and press
You can only change the settings if Modem is enabled.
Baud Rate Highlight the field beside Baud Rate and press
baud rates ranging from 300 to 115,200 appears.
. A virtual keyboard appears so
to toggle between On and Off.
. A list of