Figure 4-20 Clip-Copy Screen; Table 4-13 Using The Clip-Copy Function - Honeywell HRSD8 User Manual

Operation
3.
4.
When you search for motion events from another camera, you are asked whether or not
you want to delete the previous search results from the list.
Copying Video Clips Using the Clip-Copy Screen
Use the Clip-Copy screen to copy video clips to an internal DVD-RW or CD-RW drive,
an external USB hard disk, a CD-RW, or a flash drive. The copied video clips can be
viewed on computers running Microsoft
Appendix A, USB Hard Disk Drive Preparation
drive for clip copy. The clip copy can be done simply by pressing CLIP COPY on the
front of the DVR.
If you press the Clip Copy
button...
While in the Live monitoring
mode
During playback
For more than two seconds
while in the Playback mode
or Live Monitoring mode
1.
134
Highlight Search and then press
Search screen once you set your desired search conditions.
Select Cancel to exit the screen without saving the changes.
Table 4-13 Using the Clip-Copy Function
Then...
The Clip-Copy screen appears to allow clip copy setup.
A starting point is set for copying the video clip. The
at the bottom-left corner of the screen.
Press the CLIP COPY button again to set the ending point of the
video to be clip copied.
The One-Touch Clip Copy function initiates. The last recorded image
will be the ending point of video to be clip copied, and the system will
automatically begin to calculate the possible video data size that the
selected storage media can handle.
From the Search menu, select Clip-Copy.... The Clip-Copy screen appears.
Figure 4-20 Clip-Copy Screen
to display the search results in the Motion
®
Windows 98, ME, 2000, XP, or Vista. See
for information on preparing the external
icon displays