Reviewing Video Clips
Reviewing Video Clips
You do not need to install any special software on your personal computer to review the
video clips. The copied video clip contains the ClipPlayer program.
If you used a USB device, disconnect either the external USB hard disk drive or USB
flash drive from the DVR, and connect it to your PC. If you used a recordable DVD or
CD, insert the DVD/CD in your computer's DVD/CD drive. Double-clicking the target clip
file starts the ClipPlayer program.
Document 800-03650 Rev D
02/09
Note
It is suggested that the computer used for the ClipPlayer
program has at least an 800 MHz Pentium III. If your CPU is
slower than this, video clips recorded at maximum speed with
very high image quality play back slowly. Also DirectX 9.0 or
higher is required to run Clip Player, and a VGA card with 16 MB
or more video RAM is recommended for proper operation.
Figure C-1
ClipPlayer Screen
C
143