Figure 3-30 Webguard Screen - Honeywell HRSD8 User Manual

Configuration
Highlight Save and press
settings display the help desk information of the DVRNS server in the box beside Help
Desk.
WebGuard Setup
To set up WebGuard:
1.
2.
3.
4.
Document 800-03650 Rev D
02/09
Note The DVR name you entered should be checked by
selecting Check, otherwise the DVRNS changes will not
be saved.
An error message displays if you don't enter a name or if
you enter a name that is already registered on the
DVRNS server.
Highlight the WebGuard tab. The WebGuard screen displays.
Figure 3-30 WebGuard Screen
Highlight Use WebGuard Service, and press
See Appendix D, WebGuard
Highlight the box beside Port and press
accessing WebGuard by using the Up and Down arrows to increase or decrease
the numbers.
Highlight Save and press
exit the screen without saving your changes.
to register the DVR on the DVRNS server. Proper DVRNS
for detailed descriptions of the WebGuard service.
. Set the port number used when
to save your Network changes. Select Cancel to
to toggle between On and Off.
59