Configuration
System Event Screen
Using the System Event screen, the DVR can be configured to run self-diagnostics and
report the results.You can set the DVR to check the system, recording, and Alarm-In
activities.
Highlight System Event in the Event menu and press
Check setup screen appears.
Setting an Automatic System Self-Check Schedule
Using the UP and DOWN arrows, highlight the field beside System and press
Select how often you want the DVR to self-check by selecting from the range of 1 hr. to
30 days or Never.
Setting an Automatic Recording Self-Check Schedule
1.
Document 800-03650 Rev D
02/09
Figure 3-74
Health Check Screen
Highlight Setup... beside Check Recording and press
Recording screen appears.
. The System Event - Health
. The Check
101