Figure 3-47 Record Setup Screen - Honeywell HRSD8 User Manual

Configuration
Option
Recycle
Resolution
Event Record Dwell
Auto Deletion
Use Panic Recording
Note The following three options are only active if the Use Panic Recording option is active.
74
Figure 3-47 Record Setup Screen
Table 3-11 Record Setup Screen Options
Action
Highlight Recycle and press
In the Recycle mode, the DVR records over the oldest video data
when all available storage space has been used.
When Recycle is turned Off, the DVR stops recording when all
available storage space has been used.
Highlight the Resolution field and select from High and Standard. If
all other variables are equal, then selecting High resolution
decreases the recording and playback speed by half that of
Standard resolution.
Highlight the Event Record Dwell field and set the length of time
you would like to record for the associated event. You can set the
dwell from 5 seconds to 15 minutes.
See Event Settings
regarding event recording.
Highlight the slide bar beside Auto Deletion, and use the Left and
Right arrows to adjust the length of time recorded data is kept from
Never to 1 to 99 days.
The DVR automatically deletes video recorded earlier than the
user-defined period under three conditions: at midnight, whenever
the system reboots, or whenever the user changes the Auto
Deletion settings.
Selecting Never disables the Auto Deletion function.
Highlight Use Panic Recording and press
On and Off.
to toggle between On and Off.
on page 79 in this chapter for information
to toggle between