Figure 3-18 New Group Setup Screen; Table 3-4 New Group Authority Level Assignments - Honeywell HRSD8 User Manual

Configuration
Adding a Group
1.
2.
3.
Authority Level
Shutdown
Upgrade
System Time
Change
Data Clear
Document 800-03650 Rev D
02/09
Note To delete the User currently logged into the DVR on a local
system or a PC running RASplus (Remote Administration
System), log that user out of the system first and then delete the
user.
Highlight the + Group... field and press
you can enter the Group name. You can use up to 15 characters, including
spaces, for the group name.
When you have entered a New Group name, highlight OK and press
New Group Setup screen appears.
Figure 3-18 New Group Setup Screen
Assign authority levels to the group in the New Group setup screen.
To change all authority levels of the group, highlight the Authority field and press
to toggle between On and Off.
To change the authority level of a single User, highlight the individual authority
level boxes and press
The authority levels that can be turned On and Off are shown in
Table 3-4 New Group Authority Level Assignments
Action
The user can shut the system down on a local system.
The user can upgrade the software on a local system or a PC running
RASplus.
The user can change the system date and time on a local system or a PC
running RASplus.
The user can clear all video data or format disks on a local system or a PC
running RASplus.
. A virtual keyboard appears where
to toggle between On and Off.
. The
Table 3-4:
49