Table of Contents
Advertisement
If you lower the pitch a little further, the effect mark disappears, and the guide mark appears
at both sides
,
indicating that the precise tuning has been accomplished.
r
~ A N K
PATCH
I
' 3 Zatc:
This tuning function is designed exclusively for the use with a guitar. If you want to tune a
bass, apply harmonics.
Calibrating the Tuner
The calibration function adjusts finely the reference pitch for tuning. The 9000 sets pitch A4
to either 440 Hz, 441
Hz,
or 442 Hz.
In the Play mode, press the BYPASSITUNER key.
The
9000
goes into the Bypass status, and the tuning function is activated.
F -
- -
BANK PATCH
1
Displayed Items During Calibration
Hold down either of the VALUE
-
/
+
key.
The
display shows pitch
A4 (in
frequency) which is currently being selected, for about three
seconds.
Press the VALUE
-
/
+
key while the display shows the pitch.
This operation switches the displayed value from
440Hz
to 441Hz to 442Hz in
that
order.
The 9000 goes into the Bypass status again in about three seconds after you have selected the
desired pitch with the
VALUE
-.I
+
key, and the changed pitch is stored in memory as the
reference.
Advertisement
Table of Contents
