Table of Contents
Advertisement
In
the Edit mode, an Effect Module which comprises the Patches of the 9000 is called one
after another, and the desired parameters for each Patch c m be set.
Entering the Edit Mode
In the Play mode, select the Patch to be edited, and then press the
EDITICANCEL key.
The 9000 goes into the Edit mode, and the display shows
"EDIT."
Pressing the
EDIT/CANCEL key again sets the
9000
back in the Play mode.
BANK PATCH
0
l
a
l
I
I
!
L
cOMP+DISTI
M
i
MOD
/
DLY
1
REV I E V E L
Displayed Items in the Edit Mode
Editing Patches
Edit the Patch in the following simple steps:
1. select the Effect Module. (with the BANK DOWNIUP key and the /PATCH 1 to 4 key)
2. select the Effect Type. (with the
VALUE
-
/
+
key)
3. select the parameter. (with the PARAMETER key)
4. change the value of the selected parameter. (with the VALUE
-
/
+
key)
*
In the Edit mode, using the BANK DOWNJUP key and the PATCH
1
to 4 key,
select the Effect Module to be edited.
The 9000 has the following groups of Effect Modules for the Patches.
COMP+DIST (Compressor/distortion Effect Module group)
EQ (Equalizer Effect Module group)
MOD (Modulation Effect Module group such as chorus and flanger)
DLY (Delay Effect Module group)
REV (Reverb Effect Module group)
Advertisement
Table of Contents
