Zoom 9000 Operation Manual page 6

This manual has been written using easy terms so that it can be understood with ease by the
fist time users. However, the
9000
has several special functions which are not available with
a conventional single compact fader.
T h i s
section, therefore, explains some of the terms used
throughout the manual to describe the special functions of the
9000.
Effect
Module
The
9000
consists of basic Effect groups, which are listed below. Each group is referred to as
an "Effect Module." The following are the types of Effect Modules:
aCOMP+DIST (Compressor+distor~ion Effect Module group)
mEQ
(Equalizer Effect Module group)
0
MOD
(Modulation Effect Module group such as Chorus and flanger)
DLY (Delay Effect Module group)
l
REV
(Reverb Effect Module group)
Effect
Type
Each Effect Module consists of several types of effects (however, only one type of delay
effect is available) which are called Effect Types in this manual. Each Effect Module can use
one Effect
Qpe
at a time. See the table on page
19
for the Effect Types in each Effect
Module.
Patch
The
9000
allows you
to
use a maximum of five Effect Modules simultaneously. A group of
Effect Modules, each of which has individual audio level setting in addition to their own
Effect
Type
settings, is referred
to as
a Patch.
The 9000
can store up to
20
Patches
internally memory.
Effect Module
in the