Table of Contents
Advertisement
Effect Module 3: Modulation (MOD)
This Effect Module has 11 Effect ?hpes which change tone in time.
PITCH (pitch)
This Effect
Type
adds the effect sound with shifted pitch within a range of upper and lower
one octave,
to
the direct sound.
[Parameter]
(1)PIT (Pitch):
-12
to
1-12
This parameter determines the difference of pitch at a chromatic interval. The range which is
settable is up and down to one octave.
(2) F' I N (Fine):
-10 to
+l0
This parameter adjusts finely the change of pitch.
(3) BAL (Balance): 0
to 10
This parameter determines the volume balance between the effect sound and the direct sound.
Setting to 0 outputs only the dircct sound while setting
to
10 outputs only the effect sound.
*et#!&&
@M:
Setting the pitch (PIT) to
0
and increasing slightly the fine (FIN) gives the chorus effect with
less modulation,
to
the sound.
PHASE
This Effect
Type
adds the effect sound of different phase
to
the direct sound, and changes that
phase difference in time. An warm, straight tone which is different from flanger or chorus
can be obtained.
[Parameter]
(1)DEPT (Depth):
0 to 10
This parameter determines the depth of the phasing effect.
(2) RATE:
0 to
50
This parameter determines the waving speed of the phase.
*
MID-EQ (Mid-range equalizer)
This Effect Type is a unique effect which uses phasing effect as an equalizer. This adds the
effect sound of a different phase to the direct sound, and creates peaks and dips in the
frequency response. As a result, the sound in particular frequency ranges is pronounced.
[Parameter]
(1)DEPT (Depth):
0 to 10
Advertisement
Table of Contents
