Zoom 9000 Operation Manual page 23

Turning On and Off the Effect Module
Each effect can be turned on and off independently from others.
In the EdR mode, using the BANK DOWN/UP key and the PATCH
1
to 4 key,
select the desired Effect Module.
- *
Press the same key again.
This operation changes the onfoff status of the selected Effect Module. The display shows
"OFF
when the Effect Module is turned off.
Using
the
Comparison Function
Pressing the
BYPASSfrUNER
key while editing the Patch sets temporarily the 9000 in the
previous status (that of the last edit). This function is called "Comparison."
The
display changes as follows, and the parameter of the Patch to be edited now is set back to
the parameter before editing.
BANK PATCH
1 .
Displayed Items k r Cornpatison
To set the
9000
back
in
the Edit mode, press the BYPASSflUNER key again.
% ? & U
% ! & :
Using the Comparison function, a change of the overall effect when a parameter has been
changed can be checked with ease.