Table of Contents
Advertisement
This section cxplains thc parameters of all the effects available on the 9000. However, the
explanation does not overlap for the use of the parameters which is common to another Effect
W .
Effect Module 1 :
Cornpressor+distortion
(COMP+DIST)
This Effect Module uses a compressor and distortion effects. The compressor is an effect
which maintains the volume at a certain level without loosing a sense of tone and attack. The
distortion is an effect which gives a unique tube-amplifier-like distortion and long sustain
to
the sound.
With
this Effect Module, five degrees of the depth of the distortion for each Effect Type are
available. Compression can be adjusted by changing the parameter value.
0 CLEAN
This Effect
uses only the compressor. A clean sound without distortion is obtained.
The use of this Effect Type with chorus is suitable for arpeggios.
[Parameter]
(1)COMP (Compressor):
0
to
2
This parameter determines the depth of the compression. The higher the value is, the smaller
the difference of the level is made, and the longer sustain is obtained.
0
RHYTHM
This Effect Type gives distortion which is similar to that of a slightly distorted tube-amplifier,
to the sound. It is suitable for chord cutting.
[Parameter]
(1)COMP (Compressor): 0 to 2
0
CRUNCH
This Effect
Type
gives natural and warm distortion which is unique to the tube-amplifier, to
the sound.
[Parameter]
(1)COMP (Compressor): 0
to
2
OVDRV (Overdrive)
This Effect Type is an overdrive effect sound which fits most of sound creation.
Advertisement
Table of Contents
