Table of Contents
Advertisement
[Parameter]
(1)COMP (Compressor): 0
to
2
DlST (Distortion)
This Effect Type gives the same hard distortion as that when a large amplifier is driven fully
with sounds at high level.
[Parameter]
(1)COMP (Compressor): 0
to
2
Effect
Module
2:
Equalizer
(EQ)
This Effect Module includes two Effect Types to control the tone of sounds.
0
EQ (Equalizer)
This Effect Type is a tone-control-type equalizer which boosts or cuts high frequencies and
low frequencies independently.
[Parameter]
(1)LO (Low): -7 to +7
This parameter adjusts the sound of low frequencies.
( 2 ) H I
(High): -7 to +7
This parameter adjusts the sound of high frequencies.
ENHANC (Enhancer)
This Effect
Type boosts high
frequencies to make the sound clear.
[Parameter]
(1)DEPT (Depth):
0
to
10
This parameter determines the amount of sound
to be
pronounced. The higher the value is,
the deeper the effect is obtained.
(2)FREQ (Frequency):
0 to 10
This parameter determines the frequency to
be
boosted. The higher the value is, the more
emphasis on the high frequencies is obtained.
% & W
*M:
Giving too much distortion increases the frequency components in mid-range, and this may
loose clearness of the sound.
In
this case, use the enhancer to obtain a clear distortion sound.
Advertisement
Table of Contents
