Connection Examples - Zoom 9000 Operation Manual

Connection with
a
CD player or
a cassette tape player (Connection
Example
3)
By connecting the phones output from the CD player or
the cassette tape player
to
the
MM
IN
jack of the 9000, a mixed sound of the source sound of the
CD
or the tape, and the sound.
of the musical instrument can be output. This mixed sound through the headphones can be
used when you use the musical instnnnent in the night or can be used for the purpose of
record copying.
Connection Example 3
CD Player
k
Headphone
Connection with a tape recorder or a mixer (Connection Example
4)
The 9000 can be connected directly
to
an
MTR
(multi-track recorder) or a mixer. When
making connections to a high-fidelity audio amplifier system, turn on the amplifier
simulation function described on page 12.
- =
When the cable is connected to the IN/POWER connector of the 9000, the 9000
turns
on
automatically. When using the 9000 with batteries,
be
sure
to
disconnect the cable from the
IN connector whenever the 9000 is not in use, in order
to
extend the life of the batteries.
Conneclion Example 4
INPUT
Mixer
Tape Recorder