Table of Contents
Advertisement
**
*M:
To obtain a clear metallic sound, set COMP+DIST
to
CLEAN
(the Effect Type with the
distortion set to off), and play back with a pure tone.
Effect Module 4: Delay (DLY)
This Effect Module adds an echo sound to the direct sound. Only one Effect Type
is
available.
0
DLY1 (Delay
1)
This
Effect Type is an conventional digital delay in which
the
delay time can be set up
to
480
ms.
[Parameter]
(1)DECY:
0 to
10
This parameter determines the number of repetitions of the delay sound. The higher the
value is, the more the repetition time is obtained.
(2) TIME: 1 to 48
This parameter determines the delay time (intervals between the delay sounds). To obtain
the
actual delay time (in rns unit), multiply the parameter value by 10.
(3)
MM
(Mix level):
0
to
10
This parameter determines the mix amount of the effect sound with the direct sound. Setting
this value to
0
outputs only the direct sound while setting this value t o 10 gives a maximum
of the effect sounds (delay sounds).
Direct
DECY
I
I
:H
'TIME
Parameters of DELAY1
Advertisement
Table of Contents
