Table of Contents
Advertisement
Level
Level
Level
Direct
J.
SHP=
1
Time
Types of Shape
0
DLYP (Delay
2)
This Effect
Qpe
is a ping-pong delay effect
in
which the delayed repcats alternate between
the left and right channels.
(1)DECY (Decay): 0
to 10
This
parameter determines the number of repetitions of the delay sound.
(2) TIME: 1
to
44
This
parameter determines the delay time (intervals between the delay sounds). To obtain the
actual delay time (in ms uni
L),
multiply the parameter value by 10.
(3)
MM
( M i x
level):
0 to 10
This parameter determines the mix amount of the effect sound wiih the direct sound. Setting
this value to 0 outputs only
the
direct sound while setting this value
to
10 gives a maximum
of the effect sounds (delay sounds).
0
LEVEL (Level)
This function determines the volume of each Patch. Although,
this
is not a n effect,
it
is
stored in memory as a part of Patches.
[Parameter]
(1)LVL (Output level): 0
to
200
This parameter determines the output level of each Patch.
sh!,qd
% W :
Setting
of the
LEVEL
parameter differs from that of the master volume control to be carried
out in the Play mode.
Advertisement
Table of Contents
