Igmp Snooping Setup Commands; Show Ip Snooping - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.15 IGMP Snooping Setup Commands

This section explains the IGMP snooping configuration commands.

5.15.1 show ip snooping

Function
Displays the IGMP snooping configuration.
Prompt
xg> or xg#
Command syntax
show ip snooping [vlan <1-4094> ]
show ip snooping mrouter [vlan <1-4094>]
show ip snooping group [vlan <1-4094>]
Parameter
[vlan <1-4094>]
Displays the IGMP snooping configuration for the specified VLAN.
If this parameter is omitted, all of the VLANs configuration information is displayed.
mrouter [vlan <1-4094>]
Displays only the multicast router information for the IGMP snooping configuration.
If "vlan" is omitted, all of the VLANs' configuration information is displayed.
group [vlan <1-4094>]
Displays only the registered multicast group information for the IGMP snooping configuration.
If "vlan" is omitted, all of the VLANs' configuration information is displayed.
Command type
Operation management command
Output form
xg# show ip snooping
IGMP Snooping Information
===============================================================================
Global IGMP snooping
[vlan-1]
IGMP snooping
Registered group number
Multicast router auto learning: { Enabled | Disabled }
Fast leave
Group Membership interval
Last Member Query interval
Send Query count
IGMP snooping querier
General Query interval
Querier IP address
Multicast Router Information
----------------------------------------------------------------------------
Vlan Type
---- ------- -------------
1 static port 5
----------------------------------------------------------------------------
Multicast Group Information
----------------------------------------------------------------------------
Vlan Multicast Group Ver Member ports
---- --------------- --- ---------------------------------------------------
1 225.10.10.1
------------------------------------------------------------------------------
[vlan-2]
Global IGMP snooping
The operational state of IGMP snooping for the device is displayed.
−
−
: { Enabled | Disabled }
Mrouter ports
2 port 1 5
Enabled
IGMP snooping is enabled.
Disabled
IGMP snooping is disabled.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
: { Enabled | Disabled }
: 0 (Current) / 32 (Maximum)
: { Enabled | Disabled }
: 260 (sec)
: 2 (sec)
: 2 (times)
: { Enabled | Disabled }
: 125 (sec)
: 0.0.0.0
187/315
2007/01/22-22:17:04