About Command Reference; Command System - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.1 About Command Reference

This section describes how to read command references.

5.1.1 Command System

The following is the system of commands provided in the device:
Management LAN Interface Configuration
commands
Serial/telnet/SSH configuration commands
System Basic Operation commands
Configuration Information Operation
commands
Switch Basic Configuration commands
Link Aggregation Configuration commands
Switch Port Configuration commands
Spanning Tree Protocol (STP) Setup
commands
Virtual LAN (VLAN) Configuration commands
Quality of Service (QoS) Setup commands
Port Mirroring Setup commands
IGMP Snooping Setup commands
Statistics commands
SNMP Configuration commands
RMON Configuration commands
System Status Display commands
Maintenance commands
Item
These are used to configure functions related to the management LAN
interface.
These are used to configure functions related to serial, telnet and SSH
connections.
These are necessary commands for system operation such as the
system time setting, password setting, and file operations.
These are used for displaying or saving configuration information
(running-config and startup-config) in the device.
These are used to configure the basic functions of the device.
These are used to create/delete aggregation groups.
These are used to set the operating characteristics of each switch port.
These are used to configure STP (Spanning Tree Protocol).
These are used to configure virtual LAN (VLAN).
These are used to configure QoS (Quality of Service) configuration.
These are used to configure port mirroring.
These are used to configure IGMP Snooping.
These are used to display various operational statistics.
These are used to configure SNMP.
These are used to configure RMON.
These are used to display the system status of the device and the
operational status of its hardware.
These are necessary for maintenance of the device.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
58/315
Function