Telnet-Server; Ssh-Server; Ssh-Auto-Key-Generation - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.3.5 telnet-server

Function
Enables telnet connections with the device.
Use the no form to disable telnet connections.
Prompt
xg(config)#
Command syntax
telnet-server
no telnet-server
Command type
Configuration command
Default
Disabled
Example
Enable telnet connections to the device.
xg(config)# telnet-server

5.3.6 ssh-server

Function
Enables SSH connections with the device. Up to 4 terminal sessions can access the device concurrently.
Use the no form to disable SSH connections.
Prompt
xg(config)#
Command syntax
ssh-server
no ssh-server
Command type
Configuration command
Default
None
Note
The device supports password authentication.
The device supports only version 2.
Example
Enable SSH connections to the device.
xg(config)# ssh-server

5.3.7 ssh-auto-key-generation

Function
Regenerate authentication key when enables SSH connection.
Use the no form not to regenerate authentication key.
Prompt
xg(config)#
Command syntax
ssh-auto-key-generation
no ssh-auto-key-generation
Command type
Configuration command
Default
None
Example
The following enables to regenerate authentication key.
xg(config)# ssh-auto-key-generation
69/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009