Spanning Tree Protocol (Stp) Configuration Commands; Show Spanning-Tree - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide
5.11 Spanning Tree Protocol (STP) Configuration
Commands
This section explains the commands related to the Spanning Tree Protocol.

5.11.1 show spanning-tree

Function
Displays the state of the Spanning Tree Protocol.
Prompt
xg> or xg#
Command syntax
show spanning-tree [ detail [ { port <1-20> | agg-port <1-10> } ] ]
Parameter
detail
Displays the state of the Spanning Tree Protocol configuration in detail.
When this parameter is omitted, the display will be simplified.
port <1-20>
Specifies the ports to display.
agg-port <1-10>
Specifies the aggregation groups to display.
When "port" parameter and "agg-port" parameter are omitted, the state of all ports will be displayed.
Command type
Operation management commands
Output form (simplified display)
xg# show spanning-tree
Spanning Tree Information
===============================================================================
Switch Information for Spanning Tree
-----------------------------------------------------------------
Spanning Tree
Root Switch Priority: 32768
Root Switch ID
Root Path Cost
Root Port
Switch Priority
Switch ID
Max Age
Hello Time
Forward Time
Topology Changes
Last Topology Change: 2007/01/22-12:12:15
portfast errdisable : {enabled | disabled}
timeout
portfast errdisable : 300 sec
timeout interval
-----------------------------------------------------------------
Ports Information for Spanning Tree
-----------------------------------------------------------------
Port State
---- ---------- ---- ---- --- ------ ------ -------------------
1 Forward
2 Discard
3 Learn
4 Forward
5 Down
6 Down
7 Down
8 Down
9 Down
10 Down
11 Down
12 Down
-----------------------------------------------------------------
Flags
1: (Port role)
2: (Config type)
3: (Oper. type)
4: (Proposal state) p=Proposing
5: (Received BPDU) d=802.1d, w=802.1w
===============================================================================
: {Enabled | Disabled}
: 8000.0080.17C2.0511
: 0
: port1
: 32768
: 8001.0080.17C2.0512
: 20 (sec)
: 2 (sec)
: 15 (sec)
: 0
Mode Cost Pri PortID Flags Designated Switch
RSTP 2000 128 32769
RSTP 2000 128 32770
RSTP 2000 128 32771
RSTP 2000 128 32772
RSTP 0 128 32773
None 0 128 32774
None 0 128 32775
None 0 128 32776
None 0 128 32777
None 0 128 32778
None 0 128 32779
None 0 128 32780
R=Root, D=Designated, A=Alternate, B=Backup
p=Point-to-point, s=Shared
p=Point-to-point, s=Shared
All Rights Reserved, Copyright (C) PFU LIMITED 2009
2007/01/22-12:12:15
Rpp-w 8000.0080.17C2.0511
Bpp-w 8000.0080.17C2.0511
Bpp-w 8001.0080.17C2.0512
Dpp-- 8001.0080.17C2.0512
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
----- 0000.0000.0000.0000
156/315