XG2000 series User's Guide
5.6 Configuration File Operation Commands
This section explains the commands related to configuration files and file operations within volatile memory.
5.6.1 copy running-config startup-config
Function
Stores the configuration file (running-config) in volatile memory to the startup-config file in nonvolatile memory.
After changing running-config, use this command to use the same configuration file after restarting the system.
Prompt
xg#
Command syntax
copy running-config startup-config
Command type
Operation management command
Note
When the system is restarted without saving the information of running-config into startup-config, the information set in
running-config will be lost.
Be sure to upload the contents of the existing startup-config file to a remote server prior to saving running-config as the
contents of startup-config will be overwritten.
Example
Store running-config in startup-config. Then, check the information in startup-config using the show command.
xg# copy running-config startup-config
xg# show startup-config
5.6.2 show running-config
Function
Displays the configuration information (running-config) currently operating in volatile memory.
Prompt
xg#
Command syntax
show running-config
Command type
Operation management commands
Example
Display the contents of running-config.
xg# show running-config
99/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009