Igmp Snooping Setup Commands; Show Ip Snooping - Fujitsu XG1200 User Manual

12-port 10 gigabit ethernet layer 2 switch
Hide thumbs Also See for XG1200:
Table of Contents

Advertisement

XG1200 User's Guide

5.13 IGMP Snooping Setup Commands

This section explains the IGMP snooping setup commands.

5.13.1 show ip snooping

Function
Displays the IGMP snooping information.
Prompt
xg>, or xg#
Command syntax
show ip snooping [vlan <1-4094> ]
show ip snooping mrouter [vlan <1-4094>]
show ip snooping group [vlan <1-4094>]
Parameter
[vlan <1-4094>]
Displays the IGMP snooping information of the specified VLAN.
If this parameter is omitted, all of the VLAN information is displayed.
mrouter [vlan <1-4094>]
Displays only the multicast router information of the IGMP snooping information.
If the "vlan" is omitted, all of the VLAN information is displayed.
group [vlan <1-4094>]
Displays only the registered multicast group information of the IGMP snooping information.
If the "vlan" is omitted, all of the VLAN information is displayed.
Command type
Operation management command
Output format
xg# show ip snooping
IGMP Snooping Information
===============================================================================
Global IGMP snooping
[vlan-1]
IGMP snooping
Registered group number
Multicast router auto learning: { Enabled | Disabled }
Fast leave
Group Membership interval
Last Member Query interval
Send Query count
IGMP snooping querier
General Query interval
Querier IP address
Multicast Router Information
----------------------------------------------------------------------------
Vlan Type
---- ------- -------------
1 static port 5
----------------------------------------------------------------------------
Multicast Group Information
----------------------------------------------------------------------------
Vlan Multicast Group Ver Member ports
---- --------------- --- ---------------------------------------------------
1 225.10.10.1
------------------------------------------------------------------------------
[vlan-2]
Global IGMP snooping
The operation state of IGMP snooping of the XG1200 is displayed.
: { Enabled | Disabled }
Mrouter ports
2 port 1 5
Enabled
IGMP snooping is enabled.
Disabled
IGMP snooping is disabled.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
: { Enabled | Disabled }
: 0 (Current) / 32 (Maximum)
: { Enabled | Disabled }
: 260 (sec)
: 2 (sec)
: 2 (times)
: { Enabled | Disabled }
: 125 (sec)
: 0.0.0.0
146/258
2005/08/22-22:17:04

Advertisement

Table of Contents
loading

Table of Contents