Brother DCP-7030 Service Manual page 302

<WSW59>
Selector No.
USB serial number (SN)
1
transmission enabled/disabled
Extension of waiting time
2
between the ANSam-DIS
3
I Not used.
8
• Selector 1: Frame length selection
This is intended to prevent the problem of a continued increase in USB ports when serial
numbers are transmitted from the MFC to a Windows Vista-based PC.
It is intended only to prevent a problem specific to Windows Vista; its default setting is "0:
USB SN enabled."
• Selector 2: Extension of waiting time between the ANSam-DIS
When send from the G3 to the FAX machine of the G4, extend the waiting time between the
ANSam-DIS from 75ms to 450ms in expectation of the switching time of the echo canceller
of sending side. its default setting is "0: Valid"
<WSW60>
Selector No.
1
I Not used.
8
Function
0: USB serial number transmitted/ USB
1: Frame length selection
Function
App. 1-63
Setting and Specifications
serial number not transmitted
0: Valid 1: Invalid
Setting and Specifications
Confidential